Emergency brake bracket repaired by welding

Carpet pieces cleaned and hung to dry-these are sun bleached and color varies from piece to piece. From here they will be re-dyed to a consistent color.

Center console after re-spraying

4/15/09

Cutting out fresh air vent hole in sail panel

4/21/09

Straightening door fuzzie retainer plate before installing the fuzzies

Reinstalling emergency brake components. The switch is bad, that will be replaced. All other parts are new (boot) or reconditioned.

Holding new fuzzie in place to drill-these were stapled in place originally. This process can not be viewed.

Installing fuzzies onto the inside door ledge

4/22/09: Reconditioned seat belt receiver